Showing posts with label MOSFET. Show all posts
Showing posts with label MOSFET. Show all posts

Sunday, August 14, 2011

Power Acoustik CPT2-1500 2 Channel 1500 Watt MOSFET ? 2-ohm Stereo, 4-ohm Bridged ? Tri-Mode Capable with Selectable 45Hz, 6/12dB Bass Boost

Power Acoustik CPT2-1500 2 Channel 1500 Watt MOSFET ? 2-ohm Stereo, 4-ohm Bridged ? Tri-Mode Capable with Selectable 45Hz, 6/12dB Bass Boost

Power Acoustik CPT2-1500 2 Channel 1500 Watt MOSFET ? 2-ohm Stereo, 4-ohm Bridged ? Tri-Mode Capable with Selectable 45Hz, 6/12dB Bass Boost
2005 Dodge Ram K & N Intake Flowmsaster 12 "subs This is my travel time is the Dodge Ram Quad Cab A 05 Lonestar. 2 12 "pioneer subwoofers, 3041d 1500watt boss audio amplifier K & N short ram intake and Flowmaster 40 series muffler.

The world must realize that electricity is more expensive than our city works to switch from unsustainable to sustainable sources of electricity generation has woken up.

There is a wide range of methods of production of sustainable energy - from nuclear to wind, solar, sea or water movement, and many others.

1500 Watt Amp

Did you know that very little satisfaction from the world's energy needs through solar technology. Electricity produced in the worldSolar energy represents less than 0.01% of total energy requirements. Yet the demand for sustainable energy production is growing at almost 25% annually over the last ten years.

Compare that with fossil fuels demand, which grows only 0-2% per year.

Why are not people flocking to the production of solar energy?
We think they are. The greatest inhibitor of the assembly of solar panels on the roof is in fact the cost to make. Or, more importantly - the amortization period.If you can not recover the cost of installing solar panels in the first 12 to 18 months or less as we think it should be to build solar panels. It will definitely save money and reduce the payback period.

The decision is a simple five-step way.

First step: How much energy do you need?
Get your latest electricity bill. It is recommended that in the last 2-3 years even fluctuations in demand.

Including a table with the currentUse for each month of registration kilowatt hours (kwh) of service each month. If you have separate hot water dispensing records, too.

How much power do you have per year? What is the maximum amount was used in each year? What was the percentage increase per year?

If you want to install solar energy the amount of electricity you need is the amount used in heavy use months of this year. Then increase the average increase over the past two years.This is the maximum you need.

Step Two: Where / how your electricity consumption?
In light of the preparation of your solar energy needs, you need to understand where this energy is consumed. Count how many devices you have all the time, how many watts they use in the operation and not for the use of property for you constantly use.

Look at the labels on your devices. This will help you understand where your usage is going and why? It 'alsoIdentify areas or equipment where you can save money through better use of the devices.

On your device, you can see the power that each device used. A washing machine is creating its own hot water, for example, may 2000 watts. This is 2 per kilowatt hour.

To calculate the cost of energy for this unit, you multiply the number of kilowatts for the price of one kWh of electricity bills. It 'also very useful if there are two modes of operation of a deviceto capture both - so a washing machine and heating their own water when cold water is used, or set the air conditioning for heating and cooling.

Third step: Decide where to save energy!
We recommend a sensible approach is to areas where energy savings could be made to identify and test your savings are realistic, practical and can be maintained for a period of time.

For example, the TV. If you turn it off by remote control, is still around 20 watts. AlsoIf you are not using the TV is actually wasting energy.

And the computer. The use of the computer and the monitor about 180 watts when turned on. Computers are an energy saver, you need to have the same energy when using regular certification can be rotated. So, unless you disable it using your computer).

Fourth step: buying your technology of solar panels!
We are firmly convinced that the construction of a solar system very convenient.
The starting point for the purchase of two solar panels and yours is the amount of power you need, then, how many disks you need.

If you are followed by this article, you have a good idea of ​​how many kwh you may need.
The solar panels are 1 watt to 300 watts +. Most solar cells up to 135 watts at 12 volts direct current (12VDC). Most solar panels over 135 watts are 21 to 40 VDC.

The score is the amount of watts power(Amps x Volts) of the panels in the hot sun at 77 degrees F or 25 degrees C. This production is the industry standard for all photovoltaic panel reviews. However, it is the "best-case scenario."

In most places there are about 4 hours of peak sunlight per day, if the solar system with maximum efficiency in the operation. But their dishes 24 hours a day with all forms of light between the stars, street lamps and the conditions of heavy clouds. As an average year, we reducethe performance of a solar module of 10-15% of its maximum power.

The actual number you are interested is the watt per dollar you pay. 300 - In building the solar panels you can get the price up to $ 200 per panel. You need not be technically inclined, and information currently available packages are brilliant.

You can tell a 120-watt solar panel itself, for $ 240.00. That is $ 0.50 per watt.

Since it is practically necessary in order to reduce 120Watts, for example, 15% to 102 watts. That is $ 0.42per watts.

If you buy a 120-watt solar panel from the internet you will pay something like $ 1,100 for a unit ready for installation. This is $ 9.30 per watt if the efficiency of 15%.

If we on the right side of the house to use as an example of six solar panels generate 720 watts of power per second (when the light of the sun at peak hours) costs about $ 6600 and would be more than enough for their electricity supply .

There are about 4 hours of peak sunlighta day, but do not be fooled. Solar panels work even harder at night supply small amounts of energy from starlight (or if you're in town by the glow of streetlights constant), even in winter, though. (There are a lot of people out there who believe that solar cells do not completely work until late at night.)

Step Five: How much solar power do I need?
The energy of the sun varies from place to place around the world and is highly dependent on weather conditions.We can expect 1.2KW/m2 4095 BTU per hour or generate electricity in full sun at midday. (1 kWh = 3412.3 BTU)

Let's say your roof slopes to the south in the northern hemisphere and north in the Southern Hemisphere, is 500 m² or 48m2. In general, the available solar energy is more than a year on a square meter of roof is 1500 kWh.

He was able with the figures above, we expect 48 x 1500 = 72,000 kWh or 245 566 000 BTUs to generate. This is a day 197kwhIf, on average, as is an average of 30 kWh per day, total consumption of electricity, you would need 75 square meters or 7.5m2 of solar modules.

So that's it. We have done your homework on solar panels. See our free newsletter. Our site can be found below.

And we want your opinion!

Why are flocking to get the solar power generation?

Power Acoustik CPT2-1500 2 Channel 1500 Watt MOSFET ? 2-ohm Stereo, 4-ohm Bridged ? Tri-Mode Capable with Selectable 45Hz, 6/12dB Bass Boost
Big Power - Small price! • 2-ohm Stereo, 4-ohm Bridged Stable Class A/B • Tri-Mode Capable • Fixed HPF 80Hz (2ch. models ) • Variable 12dB 50-250Hz HPF (4ch. models) • Variable 12dB 50-250Hz LPF • Selectable 45Hz, 6/12dB Bass Boost • Frequency Response: 10Hz - 20kHz • Signal-to-Noise Ratio: 90dB • Total Harmonic Distortion: .01% • 4 ga. Power & 8 ga. Speaker Terminals • Extruded Aluminum Chassis • Black Texture Finish w/ Silver Trim & Cast Metal Badge • MOSFET PSU Transistors • Regulated PWM Power Supply • Three-Way Protection Circuitry (short, thermal & overload) • High Pass, Low Pass, and Subsonic Filters • Pre-Amp Outputs • 200mV-8V Low Level Inputs • 4 ga. Power & 8 ga. Speaker Terminals

Friday, August 12, 2011

Lanzar HTG257 2000 Watt 2-Channel Mosfet Amplifier

Lanzar HTG257 2000 Watt 2-Channel Mosfet Amplifier

Lanzar HTG257 2000 Watt 2-Channel Mosfet Amplifier
Candy Paint BerryWine 1992 Buick Roadmaster 1992 Buick engine wit 350 350 trans (rebuilt), Flowmaster 2 24 Candy Paint "TV pop trunk with neon lights in the trunk of a T1 15" Speakers 1500 watt amplifier, 26 "rims cold air conditioner * in for sale * $ 8K (our best offer) Please call or text (6620 704-7030

Lanzar HTG257 2000 Watt 2-Channel Mosfet Amplifier

Thursday, June 30, 2011

SSL F1200M FORCE 1200W MOSFET Monoblock Amplifier with Remote Subwoofer Level Control

SSL F1200M FORCE 1200W MOSFET Monoblock Amplifier with Remote Subwoofer Level Control

SSL F1200M FORCE 1200W MOSFET Monoblock Amplifier with Remote Subwoofer Level Control
Alpine audio system from BMW I thought id post, because I have vids of submarines in a BMW, as I havnt seen ... Its sale so if anyone is interested leave a comment or call me at the number on the back of my car ... $ 14,500 ono looks around for it. Audio system consists of 2x Alpine Type R 12 "sub 2x 1500watt alpine amplifier operation of V-Power ... Archives Bmw Speakers are from Alpine V-Power 350Watt amp to run with the CDA-9886 head unit with Fasia kit bmw sub box Personalized sit directly above the amp --- also runs track 0This camera cable not do it justice .... Sounds a lot like a rattlesnake ... but it does not rattle much at all .... the fuel cap, but insane wheels are 20 "Verde Avatar

They are quartz infrared heaters have been around for years, but in 2007 consumers were aware of the positive qualities of quartz infrared heat with the introduction of the Eden Pure Heater.

This new space heating is very popular, and like every good idea that has been generated a number of competitors.

1500 Watt Amp

The heaters have the following standard features such as rollers, washable filter, thermostat, and controlled by remote control. They each draw about 12 amps at startup andthen 6 or 7 amps to maintain the temperature. It is 12 per kWh (national average) the cost of these heaters to 16 per hour at full power, 12 to 1,000 watts per hour and 6 hours on low setting 500 watts.

Since the standard 110-volt circuit is 15 amps residential, must be connected to a radiator in each district, where several heaters are used.

Overall, are equipped with infrared heating modular excellent safety record and are considered as children and pets.According to a producer: "The heat generation quartz infrared heating elements has never been to a temperature that can ignite a fire." While this is probably true, it is essential to keep all space heaters at least 3 feet away from flammable objects such as curtains and furniture.

From here, the three best-selling quartz infrared heaters are built, according to Amazon.com.

3 iHeat IH 1500 (1500 watts) $ 285
Although iHeat 1500 race ended with the sale3 rd place, is a distant third behind the number one and two.

The claim to fame is that iHeat does not generate heat using quartz envelope as other infrared emitters. Instead, it uses a (Positive Temperature Coefficient) PTC quartz infrared heating elements. According to the website iHeat the heating element should last about 60,000 hours compared to 20,000 to 30,000 hours to sun lamps.

Once the hot air flows through the quartz element, which is undergoing aChamber of copper plate and a "cage" type fan spread.

Three heat settings are available from a commercial grade thermostat 500-1500 watts.

The units are shipped in the U.S. and Canada and have a 1 year manufacturer's warranty. Additional 2 year warranty for about $ 30. The heating element itself is UL listed, but the mounted unit, it is not. iHeat spare parts are available from their website:i-Heater.com. Rated an average of 3 stars.

2 edenpure GEN3 Model 1000 (1500 watts) $ 290
The GEN3 Model 1000 is the heater eden pure classic, and even their best-selling model. The GEN3 has six quartz tubes and three copper heat exchanger for generating heat and a fan to distribute heat ..

The name "1000" stands for the number of square meters is to heat the device. This product is a detailed source of controversy since it first went into the heatingSale.

The problem is that most people do not have room to 1,000 square feet, but 3 or 4 rooms with 1,000 square meters with obstacles such as doors and walls, impeding the flow of heat. In addition, it is almost impossible for a 1,500 watts (5120 BTU) Heating enough heat to 1,000 square feet if the average home would require 2300 square feet a look at 60000-80000 BTU furnace.

The GEN3 has a 3-year warranty and is UL and available in all 50 statesCanada on a separate 800-number. edenpure spare bulbs and spare parts are available at: edenpurestore.com. Rated an average of 2 stars.

1 DR-968 Dr. heater (1,500 watts) $ 195
Dr. heater, the new company in the market quartz infrared heating, won first place in this test. With a customer satisfaction 4 stars out of 5, that sells for $ 100 less than the others probably will not hurt sales.

DR PTC heater combines technology and quartzInfrared heating system for a double tube. Heat is provided by a ball bearing, high pressure distributes low fan noise.

DR Heater has a 1-year warranty, is UL and the United States and Canada. Spare parts are available from-800 to the number listed below: drheaterusa.com.

Eden-type best-selling Pure quartz infrared heating: The winner may surprise you

SSL F1200M FORCE 1200W MOSFET Monoblock Amplifier with Remote Subwoofer Level Control